Chinfa DRAN60-24A | 24V 60W Power Supply
£33.06
AC-DC PSU. Power: 60W Input: 90-264 Vac Output: 24 Vdc
DRAN60-24A from Chinfa, 24 Vdc 60 W ac-dc DIN-rail for industrial control applications.
Featuring universal input, protected outputs and a wider 60 W performance range.
378 in stock (can be backordered)
Description
The Chinfa DRAN60-24A is a compact 60W DIN rail power supply designed for industrial automation, machinery and control-panel applications. This 24V A-version uses fixed screw terminals and delivers up to 2.5A of regulated DC output current.
A universal 85 to 264VAC input range, high efficiency and an internal input filter make the DRAN60-24A suitable for industrial installations operating from common mains supplies worldwide.
The compact plastic enclosure mounts directly onto a standard 35mm DIN rail and includes protection against short circuit, overload and overvoltage conditions.
Chinfa DRAN60-24A 24V 2.5A DIN Rail Power Supply
A compact 60W industrial AC-DC power supply with universal input, regulated 24VDC output and fixed screw terminals.
The DRAN60-24A converts a single-phase AC or compatible high-voltage DC input into a stable 24VDC supply for industrial control and automation equipment. Its 2.5A output capacity makes it suitable for PLCs, sensors, relays, instrumentation, communications equipment and other regulated 24VDC loads.
Typical Applications
The Chinfa DRAN60-24A is suitable for applications including:
- Industrial automation and machinery
- PLC and remote I/O systems
- Sensors, relays and control equipment
- Process-control and factory-automation systems
- Industrial communications equipment
- Security and access-control systems
- 24VDC control panels and instrumentation
Universal AC and DC Input
The power supply accepts a wide 85 to 264VAC input and can also operate from a compatible 90 to 375VDC source. This supports use across common industrial mains systems without manual voltage selection.
60W Regulated Output
The DRAN60-24A delivers a nominal 24VDC output at up to 2.5A, providing 60W of continuous output power for industrial loads.
High-Efficiency Operation
Typical efficiency of up to 89% helps reduce internal power loss and heat generation, supporting reliable natural-convection operation inside industrial control cabinets.
Internal Input Filter
An integrated input filter helps reduce conducted electrical noise and supports dependable operation in industrial control environments.
Fixed Screw-Terminal Version
The A suffix identifies the fixed screw-terminal version, providing secure field wiring for permanent installation inside industrial control cabinets.
Integrated Protection
Short-circuit, overload and overvoltage protection help safeguard the power supply and connected equipment during abnormal operating conditions.
Key Features
The principal electrical, protection and installation characteristics of the Chinfa DRAN60-24A.
- Model: DRAN60-24A
- Terminal type: Screw terminals
- AC input voltage: 85 to 264VAC
- DC input voltage: 90 to 375VDC
- Nominal output voltage: 24VDC
- Maximum output current: 2.5A
- Rated output power: 60W
- Typical efficiency: 89%
- Protection: Short circuit, overload and overvoltage
- Cooling: Natural convection
- Degree of protection: IP20
- Operating temperature: -40 to +71°C
- Mounting: 35mm DIN rail
- Dimensions: 90 x 40.5 x 114mm
- Weight: Approximately 340g
- Warranty: 3 years
Technical Specification
Electrical, protection, environmental and mechanical information for product selection and system design.
| Specification | Details |
|---|---|
| Manufacturer | Chinfa Electronics |
| Model Number | DRAN60-24A |
| Series | DRAN60 |
| Product Type | Industrial DIN rail AC-DC power supply |
| Number of Outputs | 1 |
| Input Phase | Single phase |
| AC Input Voltage | 85 to 264VAC |
| DC Input Voltage | 90 to 375VDC |
| Input Frequency | 47 to 63Hz |
| Nominal Output Voltage | 24VDC |
| Rated Output Current | 2.5A |
| Rated Output Power | 60W |
| Typical Efficiency | 89% |
| Ripple and Noise | Approximately 50mV peak-to-peak |
| Load Regulation | Approximately ±0.5% |
| Isolation Voltage | 3,000VAC input to output |
| Operating Temperature | -40 to +71°C, subject to output derating |
| Storage Temperature | -25 to +85°C |
| MTBF | Approximately 580,000 hours |
| Cooling Method | Natural convection |
| Degree of Protection | IP20 |
| Connections | Screw terminals |
| Enclosure Material | Plastic |
| Dimensions | 90 x 40.5 x 114mm |
| Weight | Approximately 340g |
| Mounting | 35mm DIN rail |
| Compliance Standards | UL 508, UL/EN 62368-1, EN 61558-1, EN 61558-2-16 and EN 55032 |
| Warranty | 3 years |
Available Model
This product page covers only the 24V fixed screw-terminal version of the Chinfa DRAN60 series.
| Model Number | Input Voltage | Output Voltage | Output Current | Power Rating |
|---|---|---|---|---|
| DRAN60-24A | 85-264VAC / 90-375VDC | 24VDC | 2.5A | 60W |
Technical Support from Relec Electronics
As part of the Relec Electronics group, Dinrail Power benefits from over 45 years of experience supplying industrial electronic components and power solutions. Our engineering team can provide technical guidance, product selection support and assistance with DIN rail power supplies and complex industrial power requirements. For alternative solutions, customised options or specialist technical advice, visit the Relec Electronics website.
Additional information
| Weight | 270 g |
|---|---|
| Dimensions | 114 × 90 × 40.5 mm |
| Output Voltage | 12 Vdc, 24 Vdc |
| Phase | Single-Phase |
| Connector Type | Screw Terminals, Spring Terminals |
| Filter by Power Rating | 60 W |
