£76.31
AC-DC PSU. Power: 168W Input: 90-264 Vac Output: 12 Vdc
The Adel System FLEX17012A is a DIN-rail mounted 12 Vdc industrial power supply delivering up to 168 W for automation and control applications. Featuring high efficiency, parallel capability and comprehensive protection functions, it provides a compact and reliable power solution for demanding industrial environments.
3 in stock (can be backordered)
The ADEL System FLEX17012A is a compact, high-performance 12V DIN rail power supply for industrial automation, machinery and control-panel applications. Manufactured in Italy, it delivers up to 14A with flexible output power from 120W to 180W in a space-saving 55mm-wide enclosure.
The FLEX17012A uses a manually selectable 115 or 230VAC single-phase input and provides a regulated 12VDC output adjustable from 12 to 15VDC. Its flexible-power design supplies up to 14A at lower ambient temperatures while maintaining continuous operation across a wide industrial temperature range.
High efficiency, a Power Good relay, strong overload capability, three selectable protection modes and parallel-operation support make the FLEX17012A suitable for PLC systems, motors, actuators, industrial computers and other equipment requiring a dependable high-current 12V supply.
A compact industrial power supply delivering flexible output power from 120W to 180W, with strong overload capability and selectable protection modes.
The FLEX17012A converts a single-phase AC input into a stable 12VDC supply for professional industrial equipment. Its high power density, compact dimensions and natural-convection cooling make it particularly suitable for control cabinets where available DIN rail space is limited.
This high-current 12V DIN rail power supply is suitable for applications including:
The FLEX17012A delivers 14A at 12VDC below 40°C, 12A below 50°C and 10A below 60°C. Its output voltage can be adjusted from 12 to 15VDC, providing flexible power delivery from 120W to 180W according to the selected voltage, load and ambient temperature.
The power-boost function provides up to 150% of the 60°C rated current for at least three minutes. This helps the supply support motors, capacitive equipment and other loads with elevated start-up or temporary current requirements.
The FLEX17012A provides three selectable responses to overload and short-circuit conditions: manual reset, hiccup mode and continuous-output mode. This allows the protection behaviour to be matched to the characteristics of the connected equipment.
A volt-free Power Good relay contact provides an output-status signal for PLCs, alarms and supervisory systems, helping users detect output-voltage problems or loss of DC power.
The supply can start capacitive loads up to 50,000µF, making it suitable for industrial electronic equipment with large input capacitors and demanding start-up characteristics.
Compatible power supplies can be connected in parallel where additional output capacity or system redundancy is required.
The FLEX17012A is manufactured in Italy by ADEL System for professional industrial control and machinery applications.
The principal electrical, monitoring, protection and installation characteristics of the ADEL System FLEX17012A.
Electrical, protection, monitoring and mechanical information for product selection and system design.
| Specification | Details |
|---|---|
| Manufacturer | ADEL System |
| Model Number | FLEX17012A |
| Product Type | Industrial DIN rail AC-DC power supply |
| Input Phases | Single phase |
| Nominal AC Input | 115 / 230VAC, manually selectable |
| AC Input Voltage Range | 90 to 264VAC |
| Input Frequency | 47 to 63Hz |
| Nominal Output Voltage | 12VDC |
| Output Voltage Adjustment | 12 to 15VDC |
| Continuous Output Current below 40°C | 14A |
| Continuous Output Current below 50°C | 12A |
| Continuous Output Current below 60°C | 10A |
| Flexible Output Power | 180W |
| Power Boost | 150% of the 60°C rated current for at least three minutes |
| Maximum Overload Current | Approximately 1.8 to 2.2 times the 60°C rated current |
| Maximum Short-Circuit Current | 20A in hiccup mode for a maximum of two seconds |
| Capacitive Load Start-Up | Up to 50,000µF |
| Turn-On Delay | Maximum 1 second after applying the input supply |
| Efficiency | At least 91% |
| Residual Ripple | Maximum 80mV peak-to-peak |
| Hold-Up Time | Typically 20ms at 12VDC and 5A |
| Overload Protection | Manual reset, hiccup mode or continuous-output mode |
| Overvoltage Protection | Yes, approximately 35VDC typical threshold |
| Overtemperature Protection | Output shutdown with automatic restart |
| Power Good Relay | Volt-free status contact for output monitoring |
| Relay Contact Rating | Maximum 30VDC, 1A or 60VAC, 1A; minimum 1mA at 5VDC |
| Parallel Connection | Supported |
| Input to Output Isolation | 3000VAC |
| Input to Earth Isolation | 1605VAC |
| Output to Earth Isolation | 500VAC |
| Protection Class | Class I with protective earth connected |
| Degree of Protection | IP20 |
| Operating Temperature | -25 to +70°C, with 2.5% per °C derating above +60°C |
| Cooling Method | Natural convection |
| MTBF | More than 500,000 hours |
| Terminal Capacity | Screw terminals |
| Dimensions | 55 x 110 x 105mm (W x H x D) |
| Weight | Approximately 0.60kg |
| Mounting | 35mm DIN rail |
| Warranty | 3 years |
| Country of Manufacture | Italy |
This product page covers the 12V, 14A version of the ADEL System FLEX series.
| Model Number | Input Voltage | Output Voltage | Output Current | Power Rating |
|---|---|---|---|---|
| FLEX17012A | 90-264VAC | 12VDC | Up to 14A | 180W |
As part of the Relec Electronics group, Dinrail Power benefits from over 45 years of experience supplying industrial electronic components and power solutions. Our engineering team can provide technical guidance, product selection support and assistance with complex power supply requirements. For alternative solutions, customised options or specialist technical advice, visit the Relec Electronics website.
| Weight | 270 g |
|---|---|
| Dimensions | 114 × 90 × 54 mm |
| Output Voltage | 12 Vdc |
| Power | 168 W |
| Phase | Single-Phase |
| Filter by Power Rating | 180 W |
