Adel System CB122410A | 12V & 24V 240W Battery Charger
£267.43
Battery Charger. Power: 240W Input: 90-305 Vac Output: 12&24 Vdc
The Adel System CB122410A is a selectable 12 V 15 A / 24 V 10 A industrial battery charger with wide 90-305 Vac input and advanced multi-stage Battery Care charging. It offers comprehensive protections, diagnostics and Modbus monitoring in a compact DIN-rail package
3 in stock (can be backordered)
Description
The ADEL System CB122410A is a high-power DIN rail battery charger for selectable 12V and 24V industrial battery systems. Manufactured in Italy, it combines efficient switch-mode conversion with ADEL System’s intelligent Battery Care charging, testing and diagnostic technology.
A front-panel jumper allows the charger to be configured for either a 12V battery system at up to 15A or a 24V battery system at up to 10A. Its wide 90 to 305VAC input range supports 115V, 230V and 277V single-phase supplies.
Automatic multi-stage charging, battery diagnostics, alarm contacts and Modbus RTU communication make the CB122410A well suited to demanding automation, security, telecommunications and standby-power installations.
ADEL System CB122410A 12V / 24V DIN Rail Battery Charger
A configurable industrial battery charger providing up to 15A at 12V or 10A at 24V.
The CB122410A is designed to charge, maintain and test industrial standby batteries from a single-phase AC supply. Its universal 90 to 305VAC input allows the same unit to operate from common 115V, 230V and 277V mains systems.
Typical Applications
This DIN rail battery charger is suitable for applications including:
- Industrial automation and control panels
- Fire alarm and fire-protection systems
- Security, access-control and CCTV equipment
- Telecommunications and remote monitoring
- Emergency lighting and standby-power systems
- Building-management and infrastructure equipment
- AGV and material-handling systems
Selectable 12V or 24V Operation
The output voltage is selected using a front-panel jumper. In 12V mode, the charger provides up to 15A. In 24V mode, it provides up to 10A, giving a maximum nominal output power of 240W.
Automatic Battery Care Charging
ADEL System’s Battery Care technology uses an automatic multi-stage IUoUo charging process with recovery, boost, absorption and float stages. The charging current can be adjusted to suit the connected battery capacity, helping optimise charging time and long-term battery condition.
Power Management and Battery Diagnostics
The available output power is automatically allocated between the connected load and the battery, with the load given priority. Integrated diagnostics monitor battery condition, disconnection, reverse polarity and possible cell faults, while relay outputs and Modbus RTU communication support external monitoring and control.
Manufactured in Italy
The CB122410A is manufactured in Italy by ADEL System for professional industrial battery-charging and DC backup applications.
Key Features
The principal electrical, charging, communication, protection and installation characteristics of the ADEL System CB122410A.
- Product type: DIN rail industrial battery charger
- Nominal input voltage: 115 / 230 / 277VAC
- Input voltage range: 90 to 305VAC
- Selectable battery voltage: 12VDC or 24VDC
- Maximum charging current: 15A at 12V or 10A at 24V
- Maximum nominal power: 240W
- Efficiency: Greater than 91% at 50% load
- Charging method: Automatic multi-stage IUoUo charging
- Charging stages: Recovery, boost, absorption and float
- Battery compatibility: Open lead-acid, sealed lead-acid, gel, Ni-Cd and supported lithium battery types
- Charging-current adjustment: 20% to 100% of rated current
- Diagnostics: Battery condition, disconnection, reverse polarity and fault monitoring
- Communication: Modbus RTU
- Alarm outputs: Battery fault and mains / backup status contacts
- Protection: Short circuit, overload, overtemperature and reverse polarity
- Operating temperature: -25°C to +70°C
- Cooling: Natural convection
- Dimensions: 100 × 115 × 135mm
- Ingress protection: IP20
- Mounting: 35mm DIN rail mounting
- Country of manufacture: Italy
Technical Specification
Electrical, battery-management, communication, mechanical and installation information for product selection and system design.
| Specification | Details |
|---|---|
| Manufacturer | ADEL System |
| Model Number | CB122410A |
| Product Type | DIN rail industrial battery charger |
| Nominal Input Voltage | 115 / 230 / 277VAC, single phase |
| Input Voltage Range | 90 to 305VAC |
| Input Frequency | 47 to 63Hz ±6% |
| Input Current | Approximately 3.3A at 115VAC and 2.2A at 230VAC |
| Selectable Battery Voltage | 12VDC or 24VDC, selected by jumper |
| 12V Charging Current | 15A ±5% |
| 24V Charging Current | 10A ±5% |
| Maximum Nominal Power | 240W |
| Efficiency | Greater than 91% at 50% load |
| 12V Boost-Charge Voltage | 14.4VDC typical |
| 24V Boost-Charge Voltage | 28.8VDC typical |
| 12V Float-Charge Voltage | 13.8VDC typical |
| 24V Float-Charge Voltage | 27.65VDC typical |
| Charging-Current Adjustment | 20% to 100% of rated current |
| Charging Technology | Automatic multi-stage IUoUo Battery Care charging |
| Charging Stages | Recovery, boost, absorption and float |
| Compatible Battery Types | Open lead-acid, sealed lead-acid, gel, Ni-Cd and supported lithium battery types |
| Power Management | Automatic allocation of power between load and battery, with load priority |
| Diagnostic Functions | Battery condition, disconnection, reverse polarity and cell-fault monitoring |
| Status Indication | LED operating and diagnostic indication |
| Communication | Modbus RTU |
| Alarm Outputs | Dry contacts for battery fault and mains / backup status |
| Protection | Short circuit, overload, overtemperature and reverse battery polarity |
| Isolation Voltage | 3000VAC input to output |
| MTBF | Greater than 300,000 hours according to IEC 61709 |
| Operating Temperature | -25°C to +70°C |
| Storage Temperature | -40°C to +85°C |
| Cooling Method | Natural convection |
| Ingress Protection | IP20 |
| Connections | Screw terminals |
| Dimensions | 100 × 115 × 135mm |
| Weight | Approximately 850g |
| Mounting | 35mm DIN rail mounting |
| Compliance | CE; EN 62368-1 |
| Country of Manufacture | Italy |
Available Configurations
The CB122410A can be configured for either a 12V or 24V battery system using the output-voltage selection jumper.
| Model Number | Input Voltage | Output Voltage | Output Current | Power Rating |
|---|---|---|---|---|
| CB122410A | 90 to 305VAC | 12VDC | 15A | 180W |
| CB122410A | 90 to 305VAC | 24VDC | 10A | 240W |
Technical Support from Relec Electronics
As part of the Relec Electronics group, Dinrail Power benefits from over 45 years of experience supplying industrial electronic components and power solutions. Our engineering team can provide technical guidance, product selection support and assistance with complex power supply requirements. For alternative solutions, customised options or specialist technical advice, visit the Relec Electronics website.
Additional information
| Weight | 270 g |
|---|---|
| Dimensions | 114 × 90 × 54 mm |
| Output Voltage | 12 Vdc & 24 Vdc |
| Power | 240 W |
| Phase | Single-Phase |
| Filter by Power Rating | 240 W |
