Adel System CBI245A | 24V 120W DC UPS
£186.80
DC UPS. Power: 120W Input: 90-305 Vac Output: 24 Vdc
The Adel System CBI245A is a 24 V dc DC-UPS with 5 A output and integrated battery charging for industrial and automation systems. It features wide 90–305 Vac input, automatic battery management and built-in protections for dependable backup power.
3 in stock (can be backordered)
Description
The ADEL System CBI245A is an all-in-one 24V DIN rail DC UPS combining a regulated power supply, intelligent battery charger, backup controller and battery diagnostic system in one compact industrial module. Manufactured in Italy, it is designed for automation, security, telecommunications and infrastructure applications that require dependable 24V DC power.
Operating from a wide single-phase AC input, the CBI245A supplies a 24V DC load at up to 5A, providing 120W of rated output power. During a mains failure, the connected battery supports the load immediately with zero switching time, helping critical equipment remain operational.
ADEL System Battery Care technology provides automatic multi-stage charging, battery diagnostics and protection against deep discharge. The unit supports several industrial battery chemistries and includes relay signalling for mains status, backup operation and battery condition.
ADEL System CBI245A 24V 5A DIN Rail DC UPS
A 120W all-in-one DC UPS with intelligent battery charging, automatic diagnostics and seamless battery backup for industrial 24V systems.
The CBI245A provides continuous 24V DC power for critical loads. Available power is automatically shared between the connected equipment and battery charging, with priority given to the load. If the AC supply fails, the battery supports the output immediately without interruption.
Typical Applications
This 24V DIN rail DC UPS is suitable for applications including:
- Industrial automation and control systems
- Security, access control and fire-detection equipment
- Telecommunications and network infrastructure
- Process control and instrumentation
- Transport and utility installations
- Remote monitoring and signalling systems
All-in-One 24V Backup Power
The unit combines a regulated power supply, battery charger, battery test system and DC UPS controller in a single DIN rail enclosure. It supplies up to 5A continuously from the internal power supply and can deliver additional current for demanding loads when supported by the connected battery.
Battery Care Charging and Diagnostics
ADEL System Battery Care technology manages charging through recovery, boost and float stages. Automatic diagnostics monitor battery connection, polarity and condition, while deep-discharge protection helps preserve battery life during extended backup operation.
Battery Start and Alarm Signalling
The CBI245A supports restart from battery when the mains supply is unavailable. Galvanically isolated relay contacts provide signalling for mains or backup status and for discharged or faulty battery conditions.
Compact DIN Rail Installation
The IP20 enclosure is designed for 35mm DIN rail mounting and uses natural convection cooling without a fan. Its compact industrial construction is suitable for installation inside control panels and equipment cabinets.
Manufactured in Italy
The CBI245A is manufactured in Italy by ADEL System and is designed for professional industrial backup-power applications.
Key Features
The principal electrical, battery-management and installation characteristics of the ADEL System CBI245A.
- Product type: All-in-one DIN rail DC UPS
- Nominal input voltage: 115 / 230 / 277VAC
- Input voltage range: 90 to 305VAC
- Nominal output voltage: 24VDC
- Output current: 5A
- Power rating: 120W
- Efficiency: At least 90%
- Charging method: Automatic multi-stage constant-current and constant-voltage charging
- Battery compatibility: Lead-acid, sealed lead-acid, gel, Ni-Cd and lithium
- Battery functions: Automatic diagnostics, battery start and deep-discharge protection
- Signal outputs: Mains/backup and battery fault status relays
- Protection: Short circuit, overload, output overvoltage, overtemperature and reverse battery polarity
- Cooling: Natural convection
- Operating temperature: -25°C to +71°C
- Dimensions: 65 × 115 × 135mm
- Mounting: 35mm DIN rail
- Country of manufacture: Italy
- Warranty: 3 years
Technical Specification
Electrical, charging, mechanical and environmental information for product selection and system design.
| Specification | Details |
|---|---|
| Manufacturer | ADEL System |
| Model Number | CBI245A |
| Product Type | All-in-one DIN rail DC UPS, battery charger and battery controller |
| Nominal Input Voltage | 115 / 230 / 277VAC, single phase |
| Input Voltage Range | 90 to 305VAC |
| Input Frequency | 47 to 63Hz |
| Nominal Output Voltage | 24VDC |
| Output Voltage Range | 22 to 28.8VDC, up to 31VDC for Ni-Cd batteries |
| Output Current | 5A continuous from the internal power supply |
| Maximum Continuous Load Current with Battery | Up to 10A |
| Peak Load Current with Battery | Up to 15A for 4 seconds |
| Power Rating | 120W |
| Efficiency | At least 90% |
| Ripple and Noise | 60mV peak-to-peak maximum |
| Charging Technology | Automatic multi-stage constant-current and constant-voltage charging |
| Maximum Charging Current | 5A |
| Compatible Battery Types | Lead-acid, sealed lead-acid, gel, Ni-Cd and lithium |
| Battery Diagnostics | Automatic monitoring of battery connection, polarity and condition |
| Deep-Discharge Protection | Integrated battery low-voltage and deep-discharge protection |
| Signal Outputs | Mains/backup status and discharged or faulty battery status |
| Battery Start | Supports start-up from the connected battery |
| Protection | Short circuit, overload, output overvoltage, overtemperature and reverse battery polarity |
| Cooling | Natural convection |
| Operating Temperature | -25°C to +71°C, with derating where applicable |
| Ingress Protection | IP20 |
| Dimensions | 65 × 115 × 135mm |
| Terminals | Screw terminals |
| Mounting | 35mm DIN rail |
| Compliance Standards | EN 62368-1 and applicable industrial EMC standards |
| Country of Manufacture | Italy |
| Warranty | 3 years |
Available Model
This product page covers the 24V, 5A version of the ADEL System CBI series.
| Model Number | Input Voltage | Output Voltage | Output Current | Power Rating |
|---|---|---|---|---|
| CBI245A | 90 to 305VAC | 24VDC | 5A | 120W |
Technical Support from Relec Electronics
As part of the Relec Electronics group, Dinrail Power benefits from over 45 years of experience supplying industrial electronic components and power solutions. Our engineering team can provide technical guidance, product selection support and assistance with complex power supply requirements. For alternative solutions, customised options or specialist technical advice, visit the Relec Electronics website.
Additional information
| Weight | 270 g |
|---|---|
| Dimensions | 114 × 90 × 54 mm |
| Output Voltage | 24 Vdc |
| Power | 120 W |
| Phase | Single-Phase |
| Filter by Power Rating | 120 W |
